1.carbide threading inserts-WNMG
2.save production cost
3.accept trial order
4.high density&hardness
5.reasonable price
Port: shanghai,chongqing,guangzhou,etc.
Minimum Order Quantity: 200 Piece/Pieces per each size.
Supply Ability: 10000 Kilogram/Kilograms per Month
Payment Terms: L/C,T/T
Contact Supplier
Packaging Detail: in plastics boxes and cartons; wooden cases.carton dimension=(42*21*14)cm3
Delivery Detail: in 25 days; depends on the order quantity.
Carbide Indexable Inserts
1.Grade: YG6\ YG8\ YT5\ YT15\ ZP10\ ZP20\ ZK10UF\ ZK20UF, etc.
2.Type: WNMG\ WNMM\ WNMA, etc.
3.All kinds of sizes with different chip-breaker for your reference.
4. Coat; Muilti-coat; and Non-coat.
| TYPE | Dimension(mm) | ||||||
| L | I.C | S | d | r | |||
| (ISO) | (inch) | ||||||
| WNMG | 060404 | 331 | 6.5 | 9.525 | 4.76 | 3.81 | 0.4 |
| 060408 | 332 | 6.5 | 9.525 | 4.76 | 3.81 | 0.8 | |
| 080404 | 431 | 8.7 | 12.7 | 4.76 | 5.16 | 0.4 | |
| 080408 | 432 | 8.7 | 12.7 | 4.76 | 5.16 | 0.8 | |
| TYPE | Dimension(mm) | ||||||
| L | I.C | S | d | r | |||
| (ISO) | (inch) | ||||||
| WNMA | 060404 | 331 | 6.5 | 9.525 | 4.76 | 3.81 | 0.4 |
| 060408 | 332 | 6.5 | 9.525 | 4.76 | 3.81 | 0.8 | |
| 080404 | 431 | 8.7 | 12.7 | 4.76 | 5.16 | 0.4 | |
| 080408 | 432 | 8.7 | 12.7 | 4.76 | 5.16 | 0.8 | |
| TYPE | Dimension(mm) | ||||||
| L | I.C | S | d | r | |||
| (ISO) | (inch) | ||||||
| WCMT | 050304-V | 5.4 | 7.94 | 3.18 | 3.4 | 0.4 | |
| 050308-V | 5.4 | 7.94 | 3.18 | 3.4 | 0.8 | ||
| 06T304-V | 6.5 | 9.525 | 3.97 | 4.4 | 0.4 | ||
| 06T308-V | 6.5 | 9.525 | 3.97 | 4.4 | 0.8 | ||
| 080404-V | 8.7 | 12.7 | 4.76 | 5.5 | 0.4 | ||
| 080408-V | 8.7 | 12.7 | 4.76 | 5.5 | 0.8 | ||
Model No.:
Features: TBM cutters and Scraper are suitable for Komatsu, Milsubishi, Herrenknecht, Wirth, Robbins machines.
Model No.:
Features: Flat Cutters
Our flat cutter are equal to Betek's products,such as BFZ80, BFZ70, BFZ96, BFZ65, BFZ25R, BHR73, BHR133, BHR142,
Model No.:
Features: Width : 25mm
Model No.:
Features: Satin Ribbon
Model No.:
Features: Width : 25mm
Model No.: JHYJ213323-Y
Features: BUYER PROTECTION
If any failure caused by our mistakes, we solemnly promise to provide you new one for free
Model No.:
Features: pcd inserts
1) high hardness,
2) good wear resistance,
3) little coefficient of friction
4) good adhesiveness resistance.
Model No.: 20-30-40
Features: Main application scope of products: mountain bikes, skipping ropes, running machines, stepping machines, sliding cars...
Model No.:
Features: 1.used for grinding floor,countertop etc
2. high efficiency, strong abrasion strength, good working result
Model No.: AX1225M06
Features: 1.tungsten carbide burrs
2.SA-5 double cut
3.it can remove burs of the castingsforgings and the welding spatter on the weld
Model No.: FH5-06
Features: 1.We are factory
2.Size:6,8,12mm and 1/4,1/2"
3.Material:45#,YG8
4.Color:plating,sand-blasting
5.Application:wood workin
Model No.: end mill
Features: 1) Co:10-12%
2) Grain size: 0.5-0.6um
3) DIN or ANSI standard .
4) Coated or not coated....