Electro Hydraulic Thrusters,electro-hydraulic thrusters,Electro Hydraulic brakes

YT1 Series Electro-Hydraulic Thrusters are usually used in operational block brake, as a mechanical brake for lift, transport and travel etc.

Structure & action brief introduction:
The Thruster machine is made of actuating motor and body ( Centrifugal pump ), and the body has cover, jar, piston, wheel and swivel. When it is electrified, the motor will drive the turning axis and its wheels turning, and make pressure in the piston; under the influence of pressure, the oil will be sucked from the top to the bottom of the piston, and forces the piston and the pole and beam fixed on piston to rise quickly. Compressing loading spring by lever, it will make mechanical motion (Puller or brake attaching loading springs). (If matched with YWZ Series Liquid Pressure Puller, it will declutch). When it is cut off by electricity, the wheel stop turning, and the piston will drop quickly for the spring of loading spring and itself weight to force the oil to be re-back to the top of the piston, in the meantime the reset attachment will work by lever.

Technical data