Aviation Snips - RNT-003

AVIATION SNIPS

Aviation Snips is our new patent products. It can put on any power drill, making your corded or cordless drill a power aviation snips instantly. Unique appearance design and principle of operation to cut common sheet metals and materials with ease, speed, power and maneuverability. Four times efficiency more than common hand aviation snips.

Makes your Corded or Cordless drill

a POWER SNIPS INSTANTLY!

Applications

Metal Roofing | Building Panels | Metal Ductwork| PVC Fabric

Stone Coated Metal Shingles | Sheet Metal |Auto Body Panels

Advantages

1>.Long life, the best materials of 50 CR-V blades, drop forged, high frequency, hardness 56-62HRC, blades replaceable.
2>.Fast cut, both two sharp blades work, up to 200mm per second when you cut under 0.8mm sheet metals.
3>.Easy use, put on any power drill. You can choose one hand operation with two drill clamps or two hand operation with one soft handles.
4>.Cutting action is smooth, quick, and well controlled, cut sections without distortion, marks and waste.
5>.Freely curves and long- distance straight cutting, cuts mild steel up to 1.5mm, stainless steel up to 1.2mm

Accessories

1 x nuts

3 x screws

2 x drill clamps

1 x red soft grip handle

1 x SDS extension rod

1 x hex key extension rod

1 x socket set extension rod

1 x combination wrench(8mm)

WORKING INSTRUCTION

•Uses standard 350~1200rpm A/C corded drill or minimum 14.4 V cordless drill , keep low speed.

•Cuts common sheet metals and materials, like mild metal up to 1.5mm, stainless steel up to 1.0mm.

•For best results keep the snip jaws level with material being cut, blind cuts require only a 1/2”(13mm) starting hole .

•Use safety equipment, such as eye protection, non-skid safety shoes, hard hat, safety gloves.

•Check operation parts before use tools.

•Keep blades sharp and clean.

• Blades cut straight and curves

Workingsite