good quality,max pull can be preseted,automatic overpull protection system,cummins water cooled engine,BOSCH motor and pump
Port: Ningbo,china
Minimum Order Quantity: 1 Piece/Pieces
Supply Ability: 10 Piece/Pieces per Month
Payment Terms: T/T
Contact Supplier
Packaging Detail: plastic film
Delivery Detail: within 30 days
SA-YQ90 hydraulic puller
order number :07041
Essential parameter
Maximum linepull (kN):90
Continuous linepull (kN):80
Maximum linespeed (km/h):5
Bullwheel bottom of groove diameter (mm):Φ520
Bullwheel grooves number : 7
Maximum suitable steelrope diameter (mm): Φ20
Maximum through connector diameter (mm): Φ60
Engine power /speed (kW/rpm):121/2500
Dimensions (mm):3500×2100×2500
Weight (kg): 4300
Feature :
1. infinitely variable speed and linepull control ,the pull in the rope can be read on the line pull gauge .
2. the max pull for conductor –stringing operation can preset ,automatic overpull protection system .
3. spring applied –hydraulic release brake acts automatically in case of hydraulic failure ensure to safety .
4. hydraulic pull rope clamp ,replacing steel conveniently .
5. attached reel winder with automatically level wind .load and unload conveniently .
Main component
1. engine :Cummins (USA)water –cooled diesel engine .
2. main variable displacement pump ,main motor :Rexroth (BOSCH)
3. Reducer : Rexroth (BOSCH)
4. Main hydraulic valves: Rexroth (BOSCH)
5. Radiator :AKG
6. Hydraulic instrument :WIKA
7. Mating with model GSP1400 drum (order number :07125C)
8. you choose Cummins(DONGFENG) water –cooled diesel motor ,the mode is “YA-YQ90D”,order number:07042.
Model No.: CYQ-240D
Features: hydraulic Compression Pliers CYQ-240D, hand operated compression tool features a two stage rapid advance pumping system.
Model No.: CYQ-400C
Features: hydraulic Compression PliersCYQ-400C.
hand operated compression tool features a two stage rapid advance pumping system.
Model No.: FYQ-500
Features: split-unit hydraulic crimping tool FYQ-500.
crimping range:25-500 sq mm.
Model No.: YQK-70
Features: hydraulic Compression PliersYQK-70.
standard dies:4,6,10,16,25,35,50,70 mm2.
Model No.: HY-16
Features: Hydraulic steel cutter HY-16.
cut the steel bar up to 16mm.
Output: 10T.
Model No.: CB-200A
Features: hydraulic bending tool CB-200A
It is suitable for bending copper/aluminium sheet with the width of the sheet up to 200mm.
Model No.: CB-200A
Features: hydraulic brass bender CB-200A
It is used to bend copper/aluminium sheet with the thickness of 12mm,the width is 200mm
Model No.: CWC-150V
Features: hydraulic cutting tool CWC-150V.
It is suitable for cutting up to 10mm thickness of copper/aluminium sheet.
Model No.: FYP-90
Features: split-unit hydraulic cable cutter FYP-90.
It is used for cutting up to 90mm Cu/Al cable cutter.the output is 10T.
Model No.: YL-30
Features: Hydraulic Puller
Product name:split -unit hydraulic gear puller,,
Model No.: FT-1225
Features: Name:FT-1225 fitting tools
Function:connect fittings and PVC pipe..
Accessories:crimping dies:12mm,16mm,20mm
Model No.: CH-70
Features: hydraulic puncher CH-70.
It is suitable for punching angle steel,flat steel,Cu/Al sheet ,ect.