tractor front/rear mounted, PTO or tractor hydraulic powered.
single-stage auger, 3 blades Impeller.
Payment Terms: T/T
Contact Supplier
3 point hitch, PTO powered.
| MODEL | RX518PTO | RX618PTO |
| Cuting Width | 54 | 66 |
| Cuting Height | 24 | 24 |
| Fan No. | 4 blades | 4 blades |
| Fan Diameter | 18 | 18 |
| Auger Diameter | 4.8 | 4.8 |
| Drive Fan | Hyd w/gearbox | Hyd w/gearbox |
| Drive auger | Gearbox w/chain | Gearbox w/chain |
| Hitch Type | 3-point Cat,1or | 3-point Cat,1or |
| Hitch adjustment | 3 position | 3 position |
| Chute Deflector | Handing/4position/115°-145° | Handing/4position/115°-145° |
| Cutting Edge | 3/8X4Beveled | 3/8X4Beveled |
| Skid Shoes | Cut type adjustable | Cut type adjustable |
| System controls&drive | PTO w/shear pin | PTO w/shear pin |
| Hyd.Requirement | NO | NO |
| Tractor HP | 25-35HP | 25-55HP |
| Approx. Weight | 700lbs | 800lbs |
Powered by hydraulic output of tractors, mounted to tractors' FEL.
| MODEL | RX518FRT |
| Cuting Width | 54” |
| Cuting Height | 24” |
| Fan No. | 4 blades |
| Fan Diameter | 18” |
| Auger Diameter | 4.8” |
| Drive Fan | Hyd w/gearbox |
| Drive auger | Gearbox w/chain |
| Hitch Type | Front end loader |
| Hitch adjustment | FEL quickly move LD PIN |
| Chute Deflector | Handing/4position/11 5°-145° |
| Cutting Edge | 3/8”X4”Beveled |
| Skid Shoes | Cut type adjustable |
| System controls&drive | Hyd.Loader sensing block flow |
| Hyd.Requirement | 6.6-13.2gpm 2000psi min |
| Tractor HP | 25-35HP |
| Approx. Weight | 700lbs |