600 ml 1:1 Plastic Caulking Gun/Double Cartridge Gun - CG-600-1-1

600 ml 1:1 caulking gun ,plastic caulking gun,double cartridge gun

Item no.: CG-600-1-1

Cartridge: two-component

Capacity: 600ml ( 1:1 )

Material: Reinforced Nylon frame

Stainless Steel rod

Weight: 1.08kg / piece

Package:10pcs / carton

Inner packing: 385mm×200mm×115mm

Outer packing: 630mm×385mm×410mm

CAULKING GUN

(PLASTIC COMPOSITE FRAME)

(ANY COLOR ACCEPTABLE)

There are 3 strong points of our plastic caulking guns:

1 Low cost: life duration is 5 times more than iron caulking gun.

2 High-efficiency: The force is up to 270kg-300kg and save your strength 5 times more

than common iron caulking gun.

3 Brand image: Not only perfect services for the high-quality adhesive, but also high-

quality concerned tools, our products designed for it.

Brake Release
Push the brake handle forward to release the drive rod and to remove the piston pressure.

Cleaning & Maintenance
It is very important to keep the drive rod clean and to oil it frequently in order to ensure a better function.

Recover the Movement of the Piston
Symptom: Back-lash of the brake
Remedy: Turn the adjusting screw clockwise the whole way down until the drive rod can be moved back and forth.
To eliminate the back-lash, which may occur after many operations, follow the instructions below:
Turn the adjusting screw counter-clockwise until the drive rod can be exactly moved back and forth.

Suggested Use Materials:

· Epoxies, Acrylics, Silicones, Polyesters.

· Epoxy Acrylates, Hybrids, Urethanes.

· Polysulfides, foams, Polymers, polyureas

How to use caulking gun?

Instructions:

1, Open the swfit of handle and then pull the rack to reach the maximum.
2, Put into two-companent impression material cartridge.

3, Promote the trigger to make the impression material come out smoothly from the cartidge
4, After using, put the rack back to the original location.
5, Remove the cartridge, then to repeat the above operation.