460mm(18'') multi-function(4in1) grass push lawn mover - RQ04-LM18

460mm(18'') multi-function(4in1) grass push lawn mover

all series mower used in the cast aluminum chassis. durable, advanced design, high quality aluminum alloy

chassis, choosing large tonnage cast machines under the high pressure, density, high strength. Designed

according to principles of fluid mechanics, Grass smooth. Major parts of the force increased thickness and ribs,

to ensure the strength demand

1)Gasoline, oil use separately

Power lawn mowers for the fourstroke gasoline, gasoline, oil separately using. Using more than 90 # gasoline,

the four-stroke engine oil, signs for the 4T, do not use two-stroke engine oil.

2)Oil fill

Oil is the key to a good lawn mower, do not start without filling the oil, prior to each use check the oil level.

Must strictly follow the oil filling gauge, the oil must be controlled within the scope of a slash between the on-line and offline, it is better to keep up with line flush. Too much oil will cause the exhaust pipe with exhaust smoke,

engine overheat, air filter oil susceptible to choking humidity, which affect horsepower, more serious filter will be absorb

into the air, resulting in the inability to affect the machine. Oil is less than offline, will cause the machine cylinder, connecting

rod will cause severe breakage, cylinder damage. Oil brand motor oil is recommended, such as Mobil 1130, or label for the

type of engine oil 10W-40.

3).the regular replacement of oil

Before using the new machine should be running at low speed for 20 minutes, change for new oil after 5 hours using. Starting

machine for a few minutes,then shut down (in the hot state machine for oil clean and completely), the whole direction of the tiltfoot oil,

or use tools to put the bottom of the oil dipstick loose screws to release the oil. Change the oil after every 50 hours.

4)Air Filter

Every 8 hours, you should clean the air filter. Paper should be replaced every 50 hours air filter. Paper air filters can

not be cleaned with liquid detergent only to tap. Air filter sponge can be dried before using with gasoline. Note need to

clean and highly skewed, the only air filter side up, try their hand to prevent the air filter oil.

5)Spark plug

Spark plugs should be cleaned half a coke, and replaced every year

6)Blade sharpening and balancing

Blade in use for some time, if the blade is blunt ,it should be sharpened. Note the balance on both sides of the blade,

tighten the screws fixed blade.

7)The use of safety

Before using, you should first clean the bricks, angle iron, stumps and other foreign matter on the grass. No one is walking

around with 15m when using. Do not filling petrol in the room, spilling gasoline should be wiped clean. Do not smoke at work

Put on protective clothing, and wear glasses