KW0041 Model Cordless Rebar Tying Machine ,

It's a hand-held power tools which can Tie the crossed rebars speedily and automatically, Powered by The Rechargedable battery. it can be used alternatively and continuously, it is Widely used in the construction field , Which Can Higly Improves the working efficiency.

Package:BMC Plastic Box +Carton;
Item Specifications:

Maximum Tie overall diameter: 68 mm

Guns Dimensions: 335 x 310 x 80mm(13" x 12.2" x 3.15" )

Guns Weight with battery: 2,6 kg

Time to perform a mating: 1 second

Type of wire: 1,5 mm (Euqal to 16 Gauge)

Number of turns in the knot: 1

Number of nodes on a single coil: ≈ 120 - 230 knots

Nodes on one battery charge: ≈ 200 - 350 knots

The wires in a coil: 25 meters

Battery type included: NiCd

Voltage: 9,6 V

Battery capacity included: 3200 mAh

Time to recharge the battery: ≈90 min

Other Introductions:

KW-0041 used in wire diameter of 1.5MM, each bar is only a knot around the wire can be tied in diameter 8-68MM range of steel, the machine can be reinforced in accordance with intelligent control of the thickness of the wire length. 3200MAH Ni-use hydrogen batteries, is essential for site workers in the hands or arms. is the site owner of the new cost-effective choice.

KW-0041 automatic rebar tying machine reinforced the main performance parameters are as follows: whole weight of 3.3KG. Largest diameter Banding 68MM, motor voltage 9.6V. Make a knot, tied for about 1.2 seconds, the length of the basis of banding wire with the size of the reinforcement. (such as banding 10MM * 10MM 2 reinforced only wire 120MM.) A rechargeable battery can play more than 600 head node. The use of environment-friendly high-capacity (3300MAH) Ni-MH battery, charging time is about 70 minutes.the wirebundle diameter of 1.5MM, each 28 meters long wire roll.

KW-0041 machine distinguishing features:

1. Banding range: diameter small to be banded Φ8.0MM; large Φ68MM, wide adaptation occasions.

2. Tied up big:wire used for Φ1.5MM, increased the tensile strength of binding nodes; the node requirements of the tensile strength depends largely on the thickness wire.

3. Consumption of less wire: aircraft as a result of a pull back feature, saving a great extent tied to node wire consumption, lower consumption costs, the required length of wire to 110 MM for MM. Process more or less as follows: To the maximum length will be sent wire clamping--wire front-end pull back to the machine to be shut up tightly fitting steel banding wire-cut the tail and twist tight wire--back to digital. the whole process takes about 1.2 seconds.

New Keyrun Cooperation Co.,Limited specialized in wide range of Hardware and wooden Products .Polishing Machine .Power Tools .Air Tools. diamond tools, nuts & bolts, bits, saws and machinery etc. Our products are quality assured according to the advanced technology applied and strictly control the quality of raw materials.We supply many of the main stream Construction Companies right here in China .Hongkong and Worldwide. Our products are in use at many of the larger projects such as, the airport and Beijing National Stadium.