3CX-750T rotary trimmer
Highly-technique and newly development gearbox(energy saving);
Carburetor:Walbro
Port: XIAMEN
Minimum Order Quantity: 50 Set/Sets
Supply Ability: 1500 Set/Sets per Week
Payment Terms: L/C,T/T
Contact Supplier
Packaging Detail: CARTON,DOUBLE WALL.
Delivery Detail: 14 Days At Receipt of Order And Deposit, depends on quantity
The specification of 3CX-750T rotary trimmer:
| Model No. | 3CX-750T |
| Engine name | YAMADA |
| Engine type | Air-cooled,two-stroke,single cylinder gasoline |
| Max Engine power | 0.78kw/7000r/min |
| Carburetor | Diaphragm |
| Carburetor name | WALBRO |
| Ignition | CDI |
| Fuel tank capacity | 0.65L |
| 2-Cycle oil/gasoline mixing ration | 25:1 |
| Cutting Width | 720mm |
| Blade type | Single blade |
| Blade name | OCHIAI |
| Length of Blade | 750mm |
| Dimension(L×W×H)mm | 1025*300*280 |
| Start system | Recoil starter |
| Carrying type | Portable |
Note:
1. Delivery term : FOB Xiamen;
2. Payment term: 30% Deposit In Advance , The Balance (70%) T/T Before shipment;
3. Lead Time : 14 Days At Receipt of Order And Deposit, depends on quantity.
Model No.: MHBC260
Features: CG260 gasoline grass cutter
1.Advanced anti-vibration
2.Safe operation and light
3.Superior Balance
4.Certified by CE
Model No.: MHBC430c
Features: rice harvester
1.Low noise, high power
2.Long-Life Cylinders
3.Superior Balance
4.Corn harvester
Model No.: MHBC260C
Features: long reach hedge trimmer
1.Lastest design
2.Long-Life Cylinders
3.Save operation systyem
4. Low noise, high power
Model No.: MHBC4N1
Features: 25.4cc gasoline brush cutter
1.Easy Start, Low noise, high power
2.Engine power 0.75kw/7000rpm/min
3.Cetified by CE GS EPA
Model No.: MHBC260C
Features: long reach hedge trimmer
1.Lastest design
2.Long-Life Cylinders
3.Save operation systyem
4. Low noise, high power
Model No.: DS-301500
Features: 1) Output power: 24V-4.5A/hour
2) Rotate speed: 5000r/min
3) Blade diameter: 255mm
4) CE
Model No.: DS-100120
Features: 1) Voltage:230V/50Hz ,power:1000w
2) Environmental and energy conservation
3) Cutting Tool Length: 40 cm
4) CE
Model No.: DS-301401
Features: 1) Output power: 18~24V-4.5A/hour
2) Rotate speed: 5000r/min
3) Blade diameter: 255mm
4) CE
Model No.: DS-100113
Features: 1) Voltage:230V/50Hz ,power:500w
2) Environmental and energy conservation
3) Cutting tool length: 32cm
4) CE
Model No.: DS-301404
Features: 1) Output power: 24V-4.5A/hour
2) Rotate speed: 5000r/min
3) Blade diameter: 255mm
4) CE
Model No.: DS-300400
Features: 1) Power supply: 12V20AH Lead-acid battery
2) Charging: 4 hours
3) Motor output power: 135W
4) CE
Model No.: DS-100603
Features: 1) Voltage: 230V/50Hz
2) Environmental and energy conservation,low noise
3) Power: 1000w
4) CE,GS,EMC