345ml sealant applicator - CG-345

Cartridge: two-component

Capacity:345ml(10:1)

Material: ABS/Reinforced Nylon Frame

Stainless Steel Rod

Weight:1kg/piece

Packing:10pcs/carton

Inner packing:350mm×210mm×75mm

Outer packing:440mm×375mm×400m

Scope of application(tools):

1. general glass assemble,such as glass,window,and door
2. sealing,repairing and bonding the joint of other construction materials,such as aluminum,tile,some plastic and wood
3. other building or industry

Advantage:

There are 3 strong- points of our plastic caulking guns:

1. Low cost: Life duration is 5 times more than iron caulking gun.

2. high-efficiency: The force is up to 270Kg-300kg and save your strength 5 times than common air caulking gun.

3. Brand image: Not only our service of high-quality adhesive, but also high-quality concerned tools, our products are designed it.

Suggested Use Materials:

• Epoxies, Acrylics, Silicones, Polyesters.
• Epoxy Acrylates, Hybrids, Urethanes.
• Polysulfides, foams, Polymers, polyureas

Instructions:

1, Push the black handle to the front,then pull the rod to the back.

2, Put into two-component adhesive cartridges with mixing nozzles.

3, Promote the trigger to make the adhesive come out smoothly

4, After using, put the rack back to the original location.

5, Remove the cartridge, then to repeat the above operation.