25cc china gasoline chain saw - RQ10-CS2500

Product Description:

1, brand new streamlined body design, embedded after the flat of the handle, take comfort, more humane.

2, high hardness gong rotating bevel gear, the use of international technology, machine, low noise, the sound

operation more smoothly.

3, selflocking switch, security is good, with a straight handle at the same time plus the main handle, to grasp more firmly.

applicable scope:

For forest harvesting, bucking, pruning, etc., and bucking yards, railroad ties cut sawing and other operations.

Performance characteristics:

The product has a big power, high efficiency vibration sawing, logging many advantages and low cost. Forest has become

the dominant handheld mechanical harvesting.

Engine type: gasoline engine
Power type: Single cylinder, two-stroke, air-cooled
Displacement: 25.4cc
Fuel Mixture Ratio: 1:25
Power: 0.9kW/7500rpm
Idling speed: 2800r/min
Fuel tank capacity: 230ml
Engine oil tank capacity: 160ml
Ignition system: C.D.I
Carburetor: diaphragm type
General accessories: Guide bar, chain, file, plug wrench
Carrying type: hand hold
Guide bar size: 10", 12"
Chain brand: Oregon/Carlton /Chinese brand
Chain pitch: 3/8"
Chain gauge: 0.050"
Packing size: 330*250*250mm
G.W/N.W: 4.6kg/3.65kg
Loading quantity:
Qty/20' FCL: 1, 300pcs

Gasoline Chain Saw Precautions:

1) Must be familiar with before using the chain saw manual, in strict accordance with the requirements of operating

instructions to ensure the safety of the product and the life.

2) guides the chain during the installation process should pay attention to the tightness (hand pull the chain, the

chain and guide spacing of 1 cm), or affect the results.

3) Mixture of gasoline and oil than 25:1, but due to regional differences in the quality of oil, we recommend a ratio

of 20:1, recommended engine oil for the Mobil brand two-stroke engine oil.

4) Use chain saw for the first time,it must first start the machine 5 minutes, after starting work.

5) Chain saws started, must wait for the chain guide under the oil then beginning work(oil pump).

6) Affected by the transport chain saw may be screw loose, again according to the instructions before use

regulation, in general, not recommended disassemble.

7) After every 100 hours of carburetor must be cleaned before use.

8) Working eight hours after the air filter must be cleaned.

9) Chain should be replaced with a blunt or a good file with a file and then use, or affect the results and the chain saw life.

10) Chain saws when not in use is best to use plastic bottles, to avoid dust and moisture into the machine, affecting.

11) 25F chainsaw largest guide the chain's configuration is: 12 inches; 45F chainsaw largest guide chain configurations:

18 inch; 52F chainsaw largest guide chain configuration for 20inch; 62F chainsaw largest guide chain configuration for 22

inch over the range of possible machine configurations temperature, then turn off, use effect and affect machine life (summer

use of the above models, guides the chain to be reduced by 2 inches for the benefit

package:

about us: