230mm Diamond cutting blade for tile - HSJP

Diamond saw blade for ceramic

Specification 105 -- 230mm

Technic Hot pressed -- Sintered

Application Porcelain, Ceramic, etc.

Surface Painting as you need.

Direction Working without water, but the best cutting result with water.

Advantage

longer working life, fine cutting capability, nice surface, higher safety, smooth cutting section & edge, thin kerf avoid more waste in cutting, etc.

Quality control:

The test is available all the time through the whole process of production.

Each product has been tested before launching it in the market.

Attention:

1. When saw blade being selected, applicable materials to be processed shall be definite.
2. Before saw blade installed, pollutions adhering between saw blade and flange shall be removed, when installing saw blade, the marked direction shall be kept consistent with the rotating direction of electric tools, and flange shall be fastened by spanner attached to electric tools
3. Do not use any saw blade that has been deformed for being pressed of crashed
4. when operating, operator must wear safety helmet, safety footwear and goggles, protective glove, additionally, if necessary operator must use earplug, mask and so on
5. Electric tools shall have protective cover
6. ahead of operation, operator must confirm that no other irrelevant person is present
7. cutting operation shall be started after saw blade sufficiently rotated, First cutting slowly, then normal cutting after operation stabilized, excessive force or curved cutting is prohibited
8. When cutting ,do not stop saw blade rotation
9. do not touch rotating saw blade by hand
10. before changing saw blade, turn off the power of electric tools and poll power plug out from outlet