20-inch Guide bar Petrol HS-5820 Chainsaw - HS-5818

2011 Gasoline chainsaw/ Chainsaw/Chain saw/Petrol chainsaw/Power chainsaw

Update Designed Chain Saw 58cc

Speciality :

1) Brand new streamlined body design, the rear handle embedded , feel comfortable when holding,more humanized design

2) Spiral bevel gear with high hardness , adopt the Internationalization technology, lower noise, low cost when cutting tree operated more smoothly.

3) Self-locking switch,high security, highly efficient vibration sawing, a straight handle as well as the main handle, to grasp more firmly.

Function :

For timber cutting, bucking, pruning, etc., and bucking yards, railroad ties cut sawing and others.

Precaution :

1) Following instruction before use, in strict accordance with the requirements of operating instructions to ensure the safety and life cycle of the product.

2) Pay attention to the tightness of chain guide(hand pull the chain, the chain and guide spacing of 1 cm) during the installating process , or else it will influence the effects.

3) Mixture of gasoline and oil rating is 25:1, but due to regional differences in the quality of oil, we recommend a ratio of 25:1, recommended engine oil as the Mobil brand two-stroke engine oil.

4) For the first time,it must first start the machine for 5 minutes before working.

5) After operating , must wait for the chain guide under the oil before working(oil pump).

6) Affected by the transport, chain saw may be screw loose, tighten according to the instructions before using , in general, not recommended disassembling.

7) Before using, carburetor must be cleaned after every 100 hours working.

8) Air filter must be cleaned after every 8 hours working.

9) Chain should be replaced if blunt, or else it will affect the effects and the chain saw life cycle

10) When not in use it is better to be packed by plastic bags, avoiding dust and moisture into the machine.