16'' Laser Welded Diamond Blade for Multi-Purpose Concrete Cutting with Low Noisy Cuts in Steel Core---COLN - COLN

Model No.: DNHL

Features: 1.super tough high speed steel
2.e.g. M2, M2AL, M35, M42, ASP2030 etc
3.with multi-cut geometry .
4. ply-cutting and lower

Model No.: DNTC

Features: annular cutter
1.geometry for ply-cutting
2. lower friction.
3.Reduced damage of tips
4. improved performance of ships re

Model No.: DNHP

Features: 1. multi-cut geometry
2. ply-cutting and lower friction
3. better performance of endurance and removal of chips.

Model No.: DNHC

Features: hss annular cutter1. multi-cut geometry with ply-cutting and lower friction
2. better performance of endurance and removal of

Model No.: DNHX

Features: 1.high-performance high speed steel.,
2. e.g. M2, M2AL, M35, M42, ASP2030 etc,
3. multi-cut geometry for ply-cutting

Model No.: DMHX

Features: 1.Special multi-cut geometry ply-cutting
2. lower friction
3. better performance
4.brtter endurance and removal of chips.

Model No.: S14x65mmxH11

Features: Torque nut drivers
1. Material: 50Cr
2. Different sizes available
3. Finish: sand blast
4. High hardness

Model No.: PH65

Features: high toruqe screw bits
1. Material: S2, Cr-V 6150, etc.
2. Different sizes available
3. Finish: sand blast, etc.

Model No.: SP05030PH1

Features: 1/4" phillips screwdriver bits
1. Material: S2, Cr-V 6150, etc.
2. Different sizes available
3. Finish: sand blasted

Model No.: SP06555T20

Features: Tools of s2 bits for the screwdriver
1. Material: S2, Cr-V 6150, etc.
2. Different sizes available
3. Finish: sandblast

Model No.: S14x65mmxH6

Features: tools bits of 1/4" rachet allen driver
1. Material: 50Cr
2. Different sizes available
3. Finish: sand blast

Model No.: PH65

Features: Air power screwdriver bits
1. Material: S2, Cr-V 6150, etc.
2. Different sizes available
3. Finish: sand blast, etc.