1.Diameter of chisel: 135mm
2.Suitable of excavator: 16-25mts
3.Total weight:1592kgs
4.Total Length:2400mm
Port: Qingdao or Yantai
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 100 Set/Sets per Month
Payment Terms: L/C,T/T
Contact Supplier
Packaging Detail: Export standard packing
Delivery Detail: within 20days after receipt of L/C or T/T
Pukun specialize in manufacturing hudraulic breakers and accessories. And our products could matched ona variety of tonnage excavator.
MODEL | Hi-Tech 810 | ||
Gross weight | Triangle (kgs) | 1625 | |
| Tower (kgs) | 1592 | ||
Total length | Triangle (mm | 2289 | |
| Tower (mm) | 2400 | ||
Drive Oil Pressure(kgs/cm3) | 160-180 | ||
Drive Oil (litre/min) | 125-150 | ||
Striking Frequency (bpm) | 350-600 | ||
Hose Diameter (inch) | 1 | ||
Rod Diameter (mm) | 135 | ||
Rod Weight (kgs) | 115 | ||
Applicable Bucket Capacity (m3) | 0.6-0.8 | ||
Applicable Vehicle Weight (ton) | 16-25 | ||
Model No.: TNS
Features: Easily removing rusty nuts without damage to bolts.
Bolt : M12 - M33
Model No.: TPUL
Features: Hydraulic pullers are used when removing bearing,
gear or pully from shafts.
Model No.: TPB
Features: Max. 700bar(10,000psi) Hydraulic Pipe Bender
Model No.: THP
Features: Max.700bar (10,000psi) pressure.
For hydraulic cylinder and tools.
High capability
Model No.: TLN
Features: Max. Pressure 700Bar(10,000psi)
Capacity 30 - 200 tons, Stroke 200 - 230 mm
Model No.: TS
Features: Max. Pressure 700Bar(10,000psi)
Capacity 5 - 100 tons, Stroke 50 - 200 mm
Model No.: TLJ
Features: Used to lift trucks, trains, for maintenance and repair works
Max.Pressure 140Bar
Model No.: TDC
Features: Max. Pressure 700Bar(10,000psi)
Capacity 5 - 1,000 tons, Stroke 50 - 200 mm
Model No.: TAPJ
Features: This Jack is suitable for shipyards, large construction sites, such as welding jobs.
Max.700bar Pressure
Model No.: TCT
Features: Max. Pressure 700Bar(10,000psi)
Capacity : 20 tons, Stroke : 40 mm
Model No.: TAR
Features: Max. Pressure 700Bar(10,000psi)
Capacity 20 - 150 tons, Stroke 50 - 150 mm
Almost half the weight of steel cylinder
Model No.: TDCH
Features: Max. Pressure 700Bar(10,000psi)
Capacity 10 - 100 tons, Stroke 156 - 254 mm
Designed for use with Screws,Rods,Cables,etc