Strong Tricone Bits
1)Certified by API&ISO
2)20 experience
3)Best quality and low price
4)FOB 100~3000USD
Port: XinGang
Minimum Order Quantity: 1 Piece/Pieces as your requirment
Supply Ability: 500 Piece/Pieces per Month as your requirment
Payment Terms: L/C,T/T,Western Union
Contact SupplierPackaging Detail: Plywooden box or according to the customer's need
Delivery Detail: within 7 days after conform order
13 5/8" IADC 126 Steel Tooth Bits/TCI tricone bit/Rock bit
The 415 tci bits are used to drill low compressive strength, very soft formations. TCI bits maximize the use of both conical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure design, combined with maximum cone offset, results in high bit penetration rates. The deep intermesh of cutter rows prevents bit balling in sticky formations .
The 114-117 bits are used to drill low-compressive strength, soft formation. Long projection tooth lengths are used on high offset cones to provide the greatest penetration rates possible. Wear-resistant hard facing is used to control tooth wear. On the softest bits type this hard facing completely covers the bit teeth.
127
Medium-Hard Formation Tooth Bits
The 127 bits are used to drill high-compressive strength, medium hard formations. Short projection teeth with reduced crest length are used in this series of bit designs. Durable hard facing is applied to reduce tooth wear.
1. Elasatomer Sealed Roller Bearing Bit | |
Cutting Structure | The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces for steel tooth bit. |
Gauge Structure | Multiple gauge protection with gauge trimmers on the heel and gauge inserts on the gauge surface of the cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life. |
Sealed Bearing Structure | 1.Abrasion resistance and seizure resistance of the bearing are improved. 2.Premium O-ring, Optimal seal compression and curved seal structure can enhance the seal performance. |
Main Type Available | Size: 5 7/8",6",6 1/2",7 1/2",7 7/8",8 1/2",9 1/2",9 5/8",9 7/8",12 1/4",13 5/8",14 3/4",15",15 1/2",17 1/2",22",24",26", etc. IADC Code:1-- Series, 2-- Series,3-- Series |
2. Air Cooling Roller Bearing Steel Tooth Bit | |
Cutting Structure | The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces for steel tooth bit. |
Gauge Structure | Gauge protection with gauge inserts on the gauge surface of the cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability. |
Sealed Bearing Structure | Air cooling roller bearing package. Balls lock the conewhich reduces the probability of cone-dropping to minimum. |
Main Type Available | Size: 5 7/8",6",6 1/2",7 1/2",7 7/8",8 1/2",9 1/2",9 5/8",9 7/8",12 1/4",14 3/4",17 1/2", etc. IADC Code:1-- Series, 2-- Series, 3-- Series |
3. Non-Sealed Roller Bearing Steel Tooth Bit | |
Cutting Structure | The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces. |
Sealed Bearing Structure | Non-sealed roller bearing. Drilling fluid can enter the bearing directly for cooling; Balls lock the cone which reduces the probability of cone Cdropping to minimum. |
Main Type Available | Size: 2 3/8",3",3 5/8:",3 7/8",4",4 1/2",4 5/8",4 3/4",6",6 1/2",7 1/2",7 7/8",8 1/2",9 1/2",9 5/8",9 7/8",10 5/8",12 1/4", 17 1/2",etc. IADC Code:1-- Series,2-- Series,3-- |