1.Specification:12 1/4" 311.2mm
2.IADC:117
3.material:high manganese steel
4.WOB:0.35~1.05 KN/mm
5.sealing:rubber rings
Port: Tianjin Port
Minimum Order Quantity: 1 Piece/Pieces drill bits
Supply Ability: 5000 Piece/Pieces per Month drill bits
Payment Terms: L/C,T/T,Western Union
Contact Supplier
Packaging Detail: carton, wooden box, steel box, or as your requirements
Delivery Detail: within 10 days after received your payments
1. Advantages of our products:
(1) Strong resistance to abrasion and impact resistance.
(2) Cutter's quality performance is good ,
(3) long work life
(4) stocks adequate, time delivery
(5) rich experience in drill bit
(6) good after-sales service
(7) High quality, competitive price
(8)Good feedback from customer
2. Detailed Description Of This Product:
| Size | 12 1/4" 311.2mm |
| Pin shank size | 6 5/8 Reg |
| Bit type | FJ117 |
| IADC Code | 117 |
| types of bearing | jounmal beanngs |
| types of sealing | metal rings or rubber rings |
| Application formation | Very soft with low compressive strength and high drillability, such as shale, clay,sandstone and conglomerate, etc |
| Main characteristics of bit(cutting structure) | Hardfaced gage and all tooth surfaces, and the gage fitted with compacts for enhanced gage protection |
| Normal WOB KN/mm (bit dia.) | 0.35~1.05 |
| Rotary speed (rpm) | 300~80 |
3. About our company:
We can supply TCI Tricone Bit, Steel Tooth Rock Bits, Tricone Drill Bits, PDC Bits, Single Cone bits and so on.
We has more than 15 years of sales experience in domestic and foreign trade. At present, our products are widely exported to USA, European, Saudi Arabia, Egypt, Malaysia, Korea and other regions
Welcome to contact us, we are at your service at any time!
Model No.: DNHC
Features: cutting tool
1.cutting tool
2.high quality high speed steel
3.better endurance
4.better chip removal
Model No.: DNTF
Features: 1. speical-purpose carbide tips
2.multi-cut geometry for ply-cutting
3.lower friction.
4.Reduced damage of tips
Model No.: 30301
Features: Masonry Drill
For masonry cutting
Milled ground
Model No.: many
Features: Sharp,wear-resisting
Don't jumping edge
Punch least 2500 sintering diamond drill bit
Model No.: many
Features: We specialize in the production of diamond drill
Sharp,wear-resisting
Don't jumping edge
Punch least 2500 diamond drill bit
Model No.: DNHF
Features: 1.super tough high speed steel
2. M2, M2AL, M35, M42, ASP2030 etc
3.multi-cut geometry for ply-cutting and lower friction
Model No.: DNTJ
Features: drill bit
1.speical-purpose carbide tips
2. multi-cut geometry for ply-cutting
3. lower friction.
4.Reduced damage of tip
Model No.: DNHK
Features: hole cutter
1.Hss cutting tool, high-performance high speed steel
2.stable clamping
3.stable cutting
4.surface treatment
Model No.: DNHC
Features: annular drill
1.cutting tool
2.high quality high speed steel
3.better endurance
4.better chip removal
Model No.:
Features: drill bit
1.cutting tool, speical-purpose carbide tips
2.reduced damage of tips
3. better endurance
4.Multi-cut geometry
Model No.: DNTX
Features: annular cutter
1.cutting tool,speical-purpose carbide tips
2.reduced damage of tips
3. better endurance
4.Multi-cut geomey
Model No.: PDC drill bit NW series
Features: PDC concave bit 4 wings/blades
NO.45 steel as PDC bits body
More hardness & impact resistance PDC cutter
Welcome trail order