03A pu Foam Gun
1.Material:zinc alloy body
2.foam gun Bronze nozzle
3.foam gun Stainless steel needle
4.Abrasion resistant
Port: Shanghai Ningbo Lianyungang
Minimum Order Quantity: 500 Piece/Pieces PCS
Supply Ability: 20000000 Piece/Pieces per Year pcs
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: each caulking gun fill in a polybay, 24pcs/carton
Delivery Detail: 20-25 days
03A pu Foam Gun
1.foam gun Material:zinc alloy body,bronze nozzle,stainless steel needle;
2.foam gun The trigger is iron coated with Nickel;
3.foam gun Plastic handle
4.foam gun Spring seated in the beginning of the gun body;
5.The adjustable screw make the foam flow fluencly and the adjustable adapter fit for different kind of polyurethane foam cans.
Polyurethane Structural Foam Gun Operating instructions1.Shake IPF structural foam can System vigorously.
2.Screw foam can into adapter –do not over tighten!
3.When operating gun for the first time ,press trigger and let foam flow through for approx.10seconds, fill the extension tube with IPF-foam and removes residual moist air.
4.Fix needle on nozzle.
5.Foam Gun is now ready for use. During dispensing hold gun with can in upright position.
6.The foam output volume can be regulated with the trigger and controlled with the flow adjustment screw .If the adjustment screw is fully tightened down,the gun trigger is locked. Do not loosen the adjustment screw by more than 3 revolutions.
7.Before replacing can, shake new can vigorously,unscrew empty can and immediately(with 1minute)replace with a new structural foam can.
8. Can replacement has to be fast to prevent IPF-foam from hardening in the adapter .
9.If necessary, replace needle blocked with hardened foam.
10.Hardened IPF-foam residues in front of the nozzle can be removed on a piece of wood or similar material.